MENU

Thrust Products

  • 1 Thrust innovations Tow/Tie down loop Yamaha
    1 Thrust innovations Tow/Tie down loop Yamaha
    New to our parts line up We now have a Tow /Tie down loop for Yamaha stand up watecrafts so you dont have to drill a hole through your custom ski . It is integrated for single bolt use using the existing metal casting from reduction nozle to help support the billet loop. Now available in Black anodized finish ONLY this is used in emergency situation only and light pressure for tie down funtion... New to our parts line up We now have a Tow /Tie down loop for Yamaha stand up w...
  • 1 155mm 14 van pump setback Thrust innovations
    1 155mm 14 van pump setback Thrust innovations
    New for 2017 Standard 155mm set back 14 vane 75mm hub built Thrust innovations Stator section was designed smaller as all setbacks are and from Stainless steel so you dont have adverse reaction from aluminum and stainless cracking hosuing etc and so that the wear ring section could be light forcusing all the strength and weight on stator section only The wear ring is actually longer than normal... New for 2017 Standard 155mm set back 14 vane 75mm hub built Thrust innovations ...
    $1,595.00
    More
     Sold Out 
  • 1 Thrust Coupler driveline system
    1 Thrust Coupler driveline system
    New 2017 Thrust Drive line engine couplers Yamaha 650/701/760 engines  With several prototypes now behind us we are happy to release the New 8 finger high horse power billet light weight coupler system . They weigh the same as other light weight couplers on the market but have longer finger design and more surface area for the drive dampner to rest on keeping them engaged with less vibration... New 2017 Thrust Drive line engine couplers Yamaha 650/701/760 engines  Wit...
  • 1 Thrust innonvations Superfreak Skis Hood Prong
    1 Thrust innonvations Superfreak Skis Hood Prong
     Thrust Innovations Tired of attempting to put hood forks and prongs on your Superfreak? Life's better with this new hood forks system. Easily installs in under 10 minutes "requires Drill, 6mm and 8mm or equal drill bits'. The lip on our new hood prong ensures your hood will not back out during tricks and hard landings. You can easily adjust tension by tightening or loosing the...  Thrust Innovations Tired of attempting to put hood forks and prongs on yo...
  • 1 Thrust innovations Ez Drain 2"
    1 Thrust innovations Ez Drain 2"
      Thrust Ez Drain (this is a check valve ball type scupper)  no more flap that doesnt seal or gets worn out over time . This system works when the ski is sitting the water pressure closes the hole with the ball and when you are riding the 2" hole reduced to 1" is open allowing the ski to drain quick and effciently .  This is a 3 part system it comes with the 'Billet...   Thrust Ez Drain (this is a check valve ball type scupper)  no more ...
  • 1 Thrust innovations EZ Drain Rickter
    1 Thrust innovations EZ Drain Rickter
      Thrust Ez Drain (this is a check valve ball type scupper)  no more flap that doesnt seal or gets worn out over time . This system works when the ski is sitting the water pressure closes the hole with the ball and when you are riding the 2 3/4"  hole for RRP Rickter models reduced to 1" is open allowing the ski to drain quick and effciently .  This is a 3 part...   Thrust Ez Drain (this is a check valve ball type scupper)  no more ...
  • 1 Thrust innovations Ez Steering Adjustable
    1 Thrust innovations Ez Steering Adjustable
    Not to take from other manufacturers on the market, but we have created the most advanced steering system to be offered to the stand up watercraft industry. This product like our trim shows Thrust attention to detail and innovation at it's finest. First off, the steering is made from 6061 billet aluminum for strength, then hard anodized to ensure a finish to last a life time. Going deeper... Not to take from other manufacturers on the market, but we have created the mos...
     $225.00$225.00 -0%

  • 1 Thrust innovations Ez Steering shorty
    1 Thrust innovations Ez Steering shorty
    With great success of our Ez steering with adjustable height we decided to go forward with our shorty version with the gen 2 bearing set up inside like our updated ez steering adjustable . Features our patent pending bearing design and ultra lighweight billet design and  Fat bar 28.6mm bar clamping system for supersmooth oring free design with adjustable bearing tension spacer so you can... With great success of our Ez steering with adjustable height we decided to go f...